High Pressure Pump

Explore The Water Power

Sewer Jetting Equipment

For technical and sanitary reasons, sewer jetting machines are frequently cleaned. Particularly, the blocking of the cross sections as well as odour problems need to be avoided. Also, damages at the channel walls must be recognized very early, which is only possible, if the walls are completely clean. Further, inorganic deposits that reduce the sewage treatment efficiency must be removed.

Sewer jetting / drain jetting / gutter cleaning is the process of using sewer jetting machines to bring a sewer drain line back to like-new condition without having to actually replace the line. This is very cost-effective practice, as well as a nearly effortless task- especially for drain jetting that are heavily used, even for grease. (You aren’t supposed to be dumping that down there in the first place!).

Anyone, who has ever had to deal with a sewer or even residential septic tank, knows all about clogs and back-ups. Soap scum residue, grease, hair, food, mineral deposits and more can all cause a drain to back up. As much as people try to be careful with what they send down the tube, it is almost inevitable that these things will at some time pass through eventually causing clogs. Even as careful as you are with grease- you may not directly dump it down the drain- but the remaining grease on pots, pans and plates can cause a film that over the years can build up and solidify. Sometimes a simple unclogging could do but after masses of build-up and too frequent blockages, perhaps a good sewerjetters would be a more effective method that will also last plenty longer.

Pressure Jet’s high pressure drain jetters equipments, drain jetting are completely suitable to achieve all above cleaning results, because these pumps are rugged in construction, have medium speed and perform to the entire satisfaction of the customer.

There are special drain jetting machines , designed specifically for this purpose, called sewer jetters. They can clean the pipes leading from sinks and bathtubs leading to the tanks, even those at long distances, which is especially helpful in the case of industrial piping. The sewerjetters work at a high pressure, between 150-300 bar and 12-400 lpm. The pressure can be adjusted throughout the job as needed. These sewer jetting machines use a special nozzle that gets down into the drains to loosen and cuts the clogged materials that are obstructing the pathways. This essentially scours the pipes clean and then washes the debris back up to be removed, usually through a vacuum pump.

, , ,
May 26, 2011 at 6:03 AM Comment (1)

Plunger Pumps

Piston pumps and plunger pumps are reciprocating pumps that use a plunger or piston to move media through a cylindrical chamber. The plunger or piston is actuated by a steam powered, pneumatic, hydraulic, or electric drive. Piston pumps and plunger pumps are also called well service pumps, high pressure pumps, or high viscosity pumps.

Piston pumps and plunger pumps use a cylindrical mechanism to create a reciprocating motion along an axis, which then builds pressure in a cylinder or working barrel to force gas or fluid through the pump. The pressure in the chamber actuates the valves at both the suction and discharge points. Plunger pumps are used in applications that could range from 70 to 2070 bars. Piston pumps are used in lower pressure applications. The volume of the fluid discharged is equal to the area of the plunger or piston, multiplied by its stroke length. The overall capacity of the piston pumps and plunger pumps can be calculated with the area of the piston or plunger, the stroke length, the number of pistons or plungers and the speed of the drive. The power needed from the drive is proportional to the capacity of the pump.

Seals are an integral part of piston pumps and plunger pumps to separate the power fluid from the media that is being pumped. A stuffing box or packing is used to seal the joint between the vessel where the media is transferred and the plunger or piston. A stuffing box may be composed of bushings, packing or seal rings, and a gland.

Piston pumps and plunger pumps have a number of components that require the choice of materials based upon wear considerations and contact with the media type. Components may have a number of materials used including bronze, brass, steel, stainless steel, iron, nickel alloy, or other material. For example, piston pumps that function in general service or oil service applications may have an iron cylinder and piston with a steel piston rod. The plunger, discharge valves, and suction valves come in contact with the media type transferred; material choices should be considered based on the fluid transferred. In power applications where continuous duty piston pumps and plunger pumps are needed, solid ceramic plungers may be used when in contact with water and oil, but may not be the appropriate choice for use with highly acidic media types.

The difference between piston pumps and plunger pumps as compared to rotary piston pumps is the actual mechanism used to transfer the fluid. The piston elements moving along an axis are called axial piston pumps. Rotary piston pumps typically have an internal rotating mechanism that moves the piston.

Plunger Pump Heads up to 7.250 psig Plunger pump heads are preferably used for simple, non-critical fluids. For critical, abrasive, toxic or flammable fluids diaphragm pump heads are recommended.

Source:   Plunger Pumps

Find Hydro Jetting Pumps, Triplex Plunger Pumps, Car Washer, Hydrostatic Pressure Pump Application, High Pressure Cleaning System, High Pressure Triplex Plunger Pump, High Pressure Cleaning Accessories, Base Frame for High Pressure Washer @ High Pressure Plunger Pumps Manufacturer

, ,
May 14, 2011 at 2:53 AM Comment (1)

General Pump For Power Washer Equipment

Pressure washers have two main components – the engine and the pump. The high-pressure pump is the core of the system and a good quality pump, such as a General Pump, will last for years with minimal maintenance.Any pump that puts out pressure over 150 PSI (pounds per square inch) is considered a high-pressure pump. The most common high-pressure pump is the positive displacement reciprocating plunger pump / piston pump. General pumps are of this design, using solid ceramic plungers. General Pumps come in two basic designs. For medium to heavy home use, the most popular is the GPEZ series 44 with a triplex plunger pump and direct-drive system. They start at about $300.00. The General Pumps GPT series 47 solid shaft pump series 66 is a high flow triplex pump for belt-driven equipment.

This General Pump is preferred in pressure washer applications and start at about $500.There are duplex and triplex plunger pumps, but the triplex creates a smoother flow and is used most often with today’s pressure washers. Axial pumps are sometimes found on cheaper consumer models of pressure washers, and serve the purpose for homeowners who only use them occasionally, but they are usually just thrown away and replaced when broken. If you plan to keep and use your pressure washer regularly, you are better off with the triplex, ceramic plunger models such as the General Pump Series 66 high flow triplex pump.Positive displacement pumps work with the positive displacement of fluid and fixed volume.

The fluid is mechanically pushed through the channels on a regular cycle. The pressure and volume remain constant. Pressure is created when this flow is pushed through the restrictive nozzle orifice. The size of the nozzle orifice is chosen for the desired pressure at the desired flow. If you notice a decrease in pressure, check the nozzle for wear before thinking the pump is failing. High-pressure pumps today, such as General Pumps, are very robust and when properly maintained, can be virtually trouble free.What size pump do you need? Pressure washer power is calculated by multiplying the pressure per square inch (PSI) by the Gallons per minute (GPM). The easiest way to determine the right pump size for your engine is to multiply the engine horsepower by 1100.

This gives the cleaning units (CU’s) that your engine is made to deliver. (Cleaning units are figured by multiplying GPM x PSI.)To keep your General Pump in top shape for years to come there are some things you should be careful to do. You should change the oil every 3 to 5 months or after 500 hours of use. This schedule should be maintained AFTER the initial oil change, which should be done after the first 50 hours of break-in.You should always flush your General Pump with clean water after each use and use an environmentally friendly anti-freeze. Never store your General Pump with water left in it, and be careful to check the manufacture recommendations when using strong chemicals in the pump.

General Pump has been in the high-pressure pump business for over 30 years. They use forged brass manifolds, guaranteed for life. General Pumps have oversize connecting rods and wear resistant solid ceramic plungers with continuous lubricating packing.

Source:  General Pump For Power Washer Equipment

Know More about Tube Cleaning India, Sewer Jetting, High Pressure Cleaning Accessories @ High Pressure Plunger Pumps Manufacturer

, , , , ,
May 12, 2011 at 12:03 PM Comments (0)

Hydro Test of Boilers

The equipment should have been hydrostatically tested to a minimum of 1½ times the design pressure, in the factory, and copies of the manufacturer’s data report, signed by the authorized inspector witnessing and evidencing the test forwarded to all jurisdictional bodies as well as to the client.

However, the complete system, along with all interconnecting piping, should be hydrostatically tested before start-up to comply with code requirements and to check for leaks that may have occurred during shipping and handling. This test should be completed under the supervision of and witnessed by an authorized inspector who should represent the state or municipality having jurisdiction or the insurance company covering the installation.

At the option of this inspector, the hydrostatic pressure test may be at 1½ times the design pressure of the equipment, or at a pressure slightly less than the setting of the lowest safety valve. The latter test will avoid the necessity of blanking or gagging of safety valves, removing piping and plugging various pipe openings, removing controls and gage glasses, etc

The boiler and process lines must be completely vented in order to fill them with water. The following is a recommended procedure for hydrostatic testing:

1. Open the steam drum vent valve and gag the safety valves in accordance with safety valve manufacturer’s recommendations. In lieu of gagging, the safety valves may be removed and replaced with test plugs or blind flanges.

2. Open the vents on the interconnecting piping. Close steam outlet valve.

3. Isolate pressure switches, gauge glasses or control components that are not intended to be subjected to a hydrostatic test.

4. Fill the system with treated water in accordance with recommendations from the clients water treatment consultant. (Refer to section entitled “Water treatment Considerations”. The test water temperature range must be 70°F minimum to 120°F maximum (100°F to 120°F  water temperature is preferred). Care should be taken so that all air is vented while the equipment is being filled. Fill the equipment until  water overflows the vent, then close the vent.

5. Apply pressure slowly. The recommended rate of pressure increase is less than 3.4 bar (50 psi) per minute. Proper control must be  maintained so that pressure does not exceed the desired setting of the local steam boiler inspecting agency. Do not subject any pressure  part to more than 1½ times the design pressure rating of any component.

6. When the proper test pressure is reached, inspection in accordance with the test objective can begin. Examine the system for any leaks. If  no leaks are visible, hold the system in a pressurized static condition for a period long enough to satisfy the code requirement.

7. Upon completion of the test, release pressure slowly through a small drain valve. Then fully open vents and drains when the pressure  drops to 20 psig. Particular Care must be given to make sure that parts not normally containing water during Operations are drained free of water. The system should  be drained fully after hydrostatic testing, to prevent freezing, if the unit is installed in a cold weather area, and to minimize corrosion of  the metal surfaces.

8. If temporary handhole or manway gaskets were used for the test, they should be replaced with regular service gaskets before readying  the unit for operation.

Gaskets should never be reused. Replace gage glass if necessary and make sure that the gage cocks are open. Remove all blanks or gags  from safety valves andinstall relief valves, if removed.

9. Additional inspection at this time by the Authorized inspector will determine whether the installation including piping arrangements, valve gauges and controls and other equipment on the unit meets code and/or other jurisdictional requirements.

10. Refer to the “Summary of valve positions” for recommended positioning of the various valves during hydrostatic testing, from operation  manual of respective company.

Know more about Triplex Plunger Pump, High Pressure Pump, Hydro Jetting pumps @ PressureJet

, , , ,
May 11, 2011 at 10:24 AM Comments (0)

An Overview on Plunger Pumps

With state-of-the-art techniques and advanced mechanism, numerous kinds of pumps have revolutionized the functioning of specific industries. With the best of raw materials and methodologies, this facilitate effective performance and production of products. The types determine the particular tasks they perform for various industries. Be it chemical, mechanical, automobiles, manufacturing, pharmaceuticals and others, this are used everywhere to ease the work load and increase efficiency.

Amongst the variety of pumps, there are Piston Pumps, Pressure Washer Pumps. Car Wash Pumps and many more types that are available and can be used for varied purposes. Every type has specific models and they are utilized for the carrying forward the work for industrial sector. As the implementation is likely in industrial conditions, the manufacturing needs to be up to the mark. This perform the best when they are robust, highly effective and sturdy enough to handle the circumstances and conditions.

When it comes to Plunger Pumps, they are basically known for their reciprocating motion. They are high pressure pumps that utilize cylindrical mechanism for creating the desired effect. The entire mechanism is safe and excellent for usage and follows a pattern for functioning.

Their types include Industrial Triplex, Car Wash, Medium Duty Triplex, Stainless Steel Triplex Plunger Pumps and many more. The models may vary from one manufacturer to the other.

Other than Plunger Pumps, Piston Pumps are also high pressure pumps that effectively involve itself in performing at its level best. Pressure Washer Pumps and Car Wash Pumps, as the name suggests are used for cleaning and maintaining Cars and their parts. The high pressure helps in cleaning every bit of dirt, debris and other hazardous elements.

While selecting any type of this, always look for certification and authentication from the manufacturer. When you are investing on any of the pumps, it is a must to check the return on your investment.

Know more about Hydro Jetting Pumps, High Pressure Washer Pumps, High Pressure Reciprocating Pumps, High Pressure Cleaning Accessories, High Pressure Systems @ High Pressure Plunger Pumps Manufacturers

Source:  An Overview on Plunger Pumps

, , , , ,
May 6, 2011 at 12:44 PM Comments (0)

High Pressure Pump and its Usage

High pressure pumps are specially designed for industrial and commercial purposes. This high pressure pump will move air or liquid at smooth even pace. High pressure pump comes with many advanced features. The features will differ based on the model. This pump comes with flow rate display, timer, multifunction valves, stop function and other features. High pressure pumps are used in many places. This is available at reasonable price. High pressure pump provide long life and delivers high performance. These high pressure pumps are used in water supply. Moreover, these pumps are also used in carwash, reverse osmosis, pressure cleaning, DI Water misting, chemical and oil processing. This high pressure pump is suited for high pressure cleaning and reverse osmosis. There are some things to be considered before buying this high pressure pump. These are flow rate, output pressure and applicable substances. High Pressure Pumps are mainly used in oil industry and water treatment industry. A high pressure pump can generate pressures between 800 and 3000 PSI. This pump is commonly used in water jet cutting system and water jet cleaning system. Sump pump are high pressure pump that has an electric or fuel powered turbine. These pumps are very important in cleaning the city or house. There are many types of sewage pumps available. It is designed for various applications such as general or special purpose. Most of the residential and commercial waste line system uses general purpose sewage pumps. Industrial application uses specific type sewage pumps. Proper care and maintenance are required to this high pressure pump. There are several manufactures which provide the best quality pumps. You can find the High pressure pump selling dealers in online. In these websites, you can compare the different manufacture products. The high quality pumps provide the best performance and long life.

Source:  High Pressure Pump and its Usage

, ,
April 21, 2011 at 1:24 PM Comment (1)

How to Select Pressure Washers to Clean Restaurants

Pressure washers are among the most powerful and convenient tools for grease removal. In restaurants, cafeterias, fast food, and other commercial kitchens, accumulation of grease, proteins, sugars and other food residue is a major concern. Ensuring complete hygiene without introducing toxic chemical cleaning liquids becomes easier if you use one of PressureJet’s power washers with advanced features.

PressureJet sells a range of commercial and industrial pressure washers designed to take on tough grease, organic matter, dirt, and food particles. If there is adequate drainage indoors, these machines can be used to clean floors, counters, refrigerators, bathrooms, and cleaning equipment. However, because pressure cleaners often use large amounts of water, they are commonly used in outdoor areas for cleaning decks, patio furniture, and building exteriors. Pressure washers with grease removal capabilities have pressure levels ranging up to 3500 psi and temperature levels up to 330°F.

PressureJet’s pressure washers may be portable or stationary. Invest in a stationary machine for working within a limited area. The Super Max™ 15400 is an electric pressure washer that has a pressure level of 700 psi, ideal for lighter cleaning. Along with temperature levels of 330°F, this machine includes cold water, hot water, and steam temperature output.

For tasks that cover various areas, you may prefer a mobile pressure washing machine for greater convenience. The Super Max™ 6000 has an electric motor and a pressure level of 750 psi, with very high steam temperature of 330°F.

PressureJet also offers various technologies for electric pressure washers. These include AST® (Automatic Shut-Off Technology™) and Long Hose Technology, both of which enhance the use of electric powered machines.

, , , ,
April 18, 2011 at 12:49 PM Comments (3)

Features of the Best High Pressure Washers

The best high pressure washers are among the most powerful cleaning machines available. These machines are commonly found in commercial and industrial areas. A good example is heavy duty industrial degreasing. The following are some of the top specifications of these machines.

Pressure Level

The best high pressure washers reach up to 8000 psi. However, such high pressure levels are often not required. For instance, the Super Max™ 12200 features pressure levels of 2000 psi for cleaning sidewalks, driveways, building exteriors, and more.

Output Temperature

Pressure washers normally offer three varying temperature levels – cold water, hot water, and steam. Cold water means the output is at room temperature; hot water means the output has a temperature up to 210°F; and steam output has a temperature of 330°F. The best high pressure washers normally provide steam output. Many machines including the Super Max™ 12200, are tri-mode machines offering all three temperature outputs.

Flow Rate

Flow rate refers to the quantity of water that passes through the nozzle of the machine. Usually, higher pressure levels feature higher flow rates. Unfortunately, not all areas have adequate drainage facilities for machines with high flow rates.

April 17, 2011 at 6:41 AM Comments (0)

Mobile Car Wash Systems Heated with Fuel

Daimer Industries®, recognized widely for mobile car wash products, released details for the shipment of the Super Max™ 12820 line of maneuverable, fuel heated, saturated steam automotive pressure washers. The truck and auto detailing systems support very high temperature operation and pressure levels designed to clean delicate surfaces.

“These mobile car wash machines represent the high-end of our Super Max™ 12000 series designed for mobile car wash applications requiring both mobility and pressure,” noted Daimer.com’s fuel-burning pressure washer systems manager Matthew Baratta. “Each 12820 has a compact size, industrial-grade wheel system and the most cleaning power in its class.”

Mobile Car Wash Machines, Fuel Heating

The 1820 advanced auto detailing power cleaning machines can produce rated power levels of 1500 psi and flow ratings of 3 GPM. The auto detailing systems are based around a 3.9 HP NEMA electric powered, 220V-240V motor. The water pumps have been engineered to provide direct drive performance. Each pump is covered for 5 years by Daimer®’s advanced warrantee.

The mobile car wash machines use a heater-exchange system comprised of a schedule 80 coil and direct spark ignition. The systems are engineered for efficiency and can attain maximum temperature in under a minute. The auto detailing pressure washers offer three modes of cleaning: no heat water, heated water and the hottest option, super-saturated wet steam with temperatures that can top at 330ºF. The machines are available configured to burn four different fuel options: Two heating oils, diesel fuel or even kerosene. Daimer® ships the machines with a 9 gallon fuel capacity.

Know more about Triplex Plunger Pumps Manufacturers, Hydrostatic Pressure Test, High Pressure Systems @ High Pressure Pump Manufacturer

Original Source: Mobile Car Wash Systems Heated with Fuel

, , , , ,
April 15, 2011 at 1:22 PM Comment (1)

What Is A High Pressure Pump And What Are Its Uses?

A high pressure pump is broadly defined as any pump that can generate high discharge pressure, generally in excess of 800 psi. Pumps that generate pressures between 800 and 3000 psi are known as moderate high pressure pumps, while pumps that generate anywhere between 3000 psi and 5000 psi are known as very high pressure pumps. Apart from these pressure levels, there is another category of pressure pumps known as ultra high pressure pumps that generate pressures significantly in excess of 5000 psi, in the range of 10,000 psi to 40,000 psi.

Common types of pumps used for high pressure applications are reciprocating positive displacement pumps, particularly plunger pumps, which are capable of handling high pressure applications easily. Though in many cases pistons are also used with high pressure pumps, they are usually used only for applications that require working pressures below 1000 psi. One common type of positive displacement pump used for high pressure applications is the triplex plunger pump. Triplex plunger pumps consist of three plungers driven by a single prime mover. The parallel use of three plungers gives the triplex pump a discharge for every 120 degrees rotation of the prime mover. Another similar type of reciprocating pump that performs high pressure pumping duties is the quintuplex plunger pump, which is, as the name suggests, a pump with four plungers driven by a single prime mover. Quintuplex plunger pumps and triplex pumps are commonly known as power pumps and generally found in high-pressure applications.

A device that has found widespread adoption in high pressure applications is the hydraulically driven intensifier or amplifier. These devices use hydraulic pressure to significantly increase the pressure of the fluid being pumped. The intensifier consists of a common rod connecting two pistons with different bore sizes. When hydraulic fluid acts on the larger piston, it causes the smaller piston to be moved. Depending on the direction in which the smaller piston is moved by the hydraulic piston, it either takes suction or pressurizes and discharges the working fluid at very high pressure. There are two types of intensifiers and based on their construction and working, they are termed single shot intensifiers and reciprocating intensifiers. A single shot intensifier consists of one large hydraulic actuator piston and a single, smaller, high pressure piston – both connected by a common piston rod. When the large piston is moved, it makes the smaller piston move and fluid discharge takes place. When the larger piston is returned to its original position, by a spring or air-retraction, the smaller piston moves back, taking in the suction.

On the other hand, for reciprocating intensifiers, there is one large hydraulic piston mounted in the center of a piston rod with two smaller high pressure pistons on either end of the rod. When the pressurized hydraulic fluid acts on one side of the large piston and moves it, one of the smaller pistons takes suction from the low pressure line, while the other smaller piston simultaneously pressurizes the fluid in its bore and discharges it at high pressure. Alternately, when the hydraulic pressure acts on the opposite side of the larger piston, the smaller piston, which was taking suction, pressurizes the fluid and discharges it, and the smaller piston that was discharging, takes the suction.

These high pressure pumps have found uses in a variety of high-pressure applications, with reciprocating pumps such as triplex pumps, commonly being used in high pressure applications such as water pumps for water jet cutting systems plus water jet cleaning systems. Some other applications where high pressure pumps are used include foam firefighting, reverse osmosis desalination, as well as pumping of liquid CO2 and high vapor liquids.

Know more about Electric Pressure Washer, Wet Sandblasting, High Pressure Surface Cleaner @ High Pressure Plunger Pumps Manufacturer

Source: What Is A High Pressure Pump And What Are Its Uses?

, , , , , ,
April 14, 2011 at 12:22 PM Comments (2)

« Older Posts